PDA

View Full Version : Full fairings for SV650S

Romeo_Tango
10th April 2005, 11:06 AM
Been looking to get a 03+ SV650S to start out on (though I love the 1000S with it's dual pipes, it's been a while since I've ridden) I've seen on Suzuki's website that you can by the other half of the fairngs for the 1000S but not for the 650S. Anyone seen a good aftermarket that makes it? Or does Suzuki make it but doesn't advertise it? I'm current;y stationed in Japan so I could order it here. (Looking for a US-spec bike as we speak)
NS_Dave
10th April 2005, 11:36 AM
As far as I know you can get the factory lower for the 650, I have seen them.
try http://www.oneidasuzuki.com
I think they have it, prices arn't too bad either

I had an 02 650S- great bike!
and welcome to the site :beer:
yellowsv650s
11th April 2005, 12:28 PM
Suzuki makes lowers for the SVS.

www.oneidasuzuki.com
Has the best prices of all times on Suzuki Parts.


There is also a company called JMV that makes some aftermarket lowers.
I don't know of a website for them.
chris206
11th April 2005, 01:06 PM
do a search for jmv lowers, there are several links on here for different websites were they can be brought from.
i have just about five minutes ago brought the jmv lowers, they cost £285 painted
rogfog
11th April 2005, 01:40 PM
do a search for jmv lowers, there are several links on here for different websites were they can be brought from.
i have just about five minutes ago brought the jmv lowers, they cost £285 painted

Chris- did you use Rhencullen??
SV Devon
11th April 2005, 02:35 PM
....I started a thread for the JMV lowers available at www.eurobikes.com for us USA customers.....cost for painted lowers shipped was $375.....which is cheaper then the Suzuki lowers.....the only downside to the JMV lowers is that there is no prefabed hole for spacers.....I'll be cutting em myself.....you can see some here (http://freespace.virgin.net/mark1.bradley/)....
chris206
13th April 2005, 02:54 PM
yes i did, they gave me the 10% discount and Stephen(sales guy) was very helpful.
i will definitly use them again, very effecient
IndySV1K
13th April 2005, 03:15 PM
Shark Skinz also makes a full fairning for both 650 and the 1000. I like 'em because they look less thrown together than the Suzuki part (which looks like it doesn't go on the bike IMO). Also, Hotbodies makes a full fairing kit but I think it's just a gixxer fairing that's been adapted to fit. Have a look at Big Thumpa's pictorial FAQ.

http://sv1000.lsn.net/
http://www.sharkskinz.com/
http://www.hotbodiesracing.com