SV Portal Forums banner
1 - 4 of 4 Posts

·
Registered
2007 sv1000
Joined
·
12 Posts
Discussion Starter · #1 ·
Hi guys.

I was out for a ride last weekend and all of a sudden my high beams turned on. turning the lights switch from dim to high does nothing. hitting the pass switch doesn't do much.
Any ideas as to what the cause may be or where to start looking?

please excuse the mess in the shed, its a work in progress.

Tire Wheel Automotive tire Motor vehicle Vehicle
 

·
Disturbed, very...
2003 SV1000S
Joined
·
2,018 Posts
Strip the switch block down and see if there is a loose wire, or some grit, or sh!t in there.... give the switch assy a flush with brake clean and then WD40 when dry.....
Beyond that its maybe a new one
 

·
Registered
2007 sv1000
Joined
·
12 Posts
Discussion Starter · #3 ·
ok so I stripped every thing down and the switch was fine. I believe it was something to do with the light but I pulled it all apart and put it together again and I seemed to have fixed the problem but never found a fault.
Hopefully it doesn't come back.
 

·
Disturbed, very...
2003 SV1000S
Joined
·
2,018 Posts
Must have been a dirty connection.... possibly something just enough to bridge a contact
 
1 - 4 of 4 Posts
Top