SV Portal banner

1 - 9 of 9 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Just wanted to mention that I am really happy with the quality of some lowers I bought on ebay for $200.

They have a good finish, look cnc cut, not too heavy but not too flimsy either. The lines look about as good as stock.

I was a bit nervous about the low price, and figured I was taking a chance. However, it worked out fine. Nothing came up searching the forum for "polish fairings" so I figured I'd let everyone know that it worked out.

Not sure if I should post an ebay link here- it'll expire. But if you're looking for fairings on ebay, you'll probably find auctions by cwv-carswantchange.
 

·
Registered
Joined
·
429 Posts
Have you got a picture of them
 

·
Registered
Joined
·
429 Posts
They look good quality . If anyone is interested in these I have a set for sale , I think they came from the same seller
 

·
Registered
Joined
·
519 Posts
Too bad they're fiberglass and not ABS Plastic...
 

·
Registered
Joined
·
14 Posts
Discussion Starter #6
<a href="http://imgur.com/4WfE688"><img src="http://i.imgur.com/4WfE688.jpg" title="Hosted by imgur.com" /></a>
 

·
Registered
Joined
·
14 Posts
Discussion Starter #7
Matching the Suzuki colour added a few dollars- in the end I paid $400 for paint- which still comes in under OEM prices.

I had to fab up three brackets: Rear lower mounts, and for some reason the throttle side doesn't use the rad mount screw. The clutch side does.

Now I just need to get the no-cut sliders, with the offset bracket.
 

·
Registered
Joined
·
7 Posts
Matching the Suzuki colour added a few dollars- in the end I paid $400 for paint- which still comes in under OEM prices.

I had to fab up three brackets: Rear lower mounts, and for some reason the throttle side doesn't use the rad mount screw. The clutch side does.

Now I just need to get the no-cut sliders, with the offset bracket.
How did you install the fairing? Were you able to find a fitting kit somewhere or you made it yourself? I ordered it last week, it should arrive in 10 days and I still have no idea how I will install them :(

Also did you use any insulation on the motor side, especially near the exhaust? If you didn't, did it melt? I am not sure about fiberglass's thermal resistance

Sent from my SM-G930F using Tapatalk
 
1 - 9 of 9 Posts
Top