SV Portal Forums banner
1 - 2 of 2 Posts

·
Disturbed, very...
2003 SV1000S
Joined
·
1,900 Posts
Fantastic colour buddy...

I always havee my bike set to 1400 idle.....though, not knowing where you are altitude wise, if you have the bike set at 1300 at a high altitude and then ride down a decent mountain, the idle will increase.

Check the cold idle clearance on the stepper motor n the forn throttle body. Once that is set, i assume you hae the -C00 set at the middle at 1400 and it goes to the top at 1750....(seems the best setting all round)
Also, check the STPS OHMs...... black to yellow ahould be 4.38 fully open, engine off, connector apart....open the secondary buttrfies by turning the steppe rmotor by hand.
 
  • Like
Reactions: Urbanjugle

·
Disturbed, very...
2003 SV1000S
Joined
·
1,900 Posts
I found my intake flanges to be cracked by spraying brake clean aerosol around all vacuum areas.....makes the engine stagger a little, or a lot..... just sheild the intake of the throttle bodies
so you dont get a false positive that way...
 
  • Like
Reactions: Urbanjugle
1 - 2 of 2 Posts
Top