[GDCobra]

You do realise, MOTORcycles are better for your health.....

Damn, thats not good..... broken or cracked ? Hope you heal up quicker than they say

It’s pretty well mullered the socket in the pelvis with multiple fractures. It is crazy when people point the finger at motorcycles as dangerous and then I have a result like the while it for a pedal!

 

[toto13]

Unfortunately I'm going to be out of the loop on this for a good few weeks now.

Get well soon




So, I converted the bike with the harness and the 16-bit ECM from 2003, and nothing changed.
still rough

I do not know what to do. I'm doing something wrong, but what?

 

[RecoilRob]

The weird ignition timing being negative got me to wondering what was going on? I think it's because the ignition system cannot anticipate a future spark event and only can retard from the maximum value set by the crank trigger and ECU. Considering that the SV/DL should idle about 5'ish degrees advance it makes sense to see a large negative number waiting to fire the plugs at idle speed. The K7 SV1K has about 46.5 degrees of advance at max revs...which is a LOT. This is emissions tuning where you can actually reduce detonation and NOx creating high combustion temperatures by lighting the fire way early before the piston has actually compressed the charge anywhere near fully. At 45 degrees there isn't much real compression going on so the burn is slow and needs a lot of fuel. Leaning the mixture without addressing the timing advance doesn't work..got to do both. Light throttle fueling should be controlled by the IAP (boost) sensors below 11% throttle opening it's running on the MAP sensors and throttle more than RPM like it does at higher revs where AlphaN programming is throttle opening and RPM controlled and ignores the MAP sensors.

 

[estevns]

Had a chance to try out the ELM327 with SZ Viewer yesterday - however no luck. SZ Viewer was not able to read anything and messages was displayed suggesting it was a knockoff. I did test the cable and the two connectors seems to be wired correctly.

The ELM327 module works just fine in my car.
My brother have VCDS tool for VAG cars, will see if they outcome is any different.

 

[toto13]

Damn, it must be a low-end ELM327. I had this problem with an ELM bought 5$ on Ebay

You need at least one ELM at $10-15

 

[estevns]

Damn, it must be a low-end ELM327. I had this problem with an ELM bought 5$ on Ebay

You need at least one ELM at $10-15

I'll try to get my hands on another ELM.
Seems like a lot of fake products are floating around.