[Smurf]

Morning,
My SV is missing the tank prop; would someone be kind enough to put up a photo/drawing with dimensions please.

 

[estevns]

There are two versions if I remember correctly. One that sits around the dome nut on your upper triple tree, and another that sits inside center hole in dome nut.
I can only provide measurements for the later one. It came with my GF's 650 K3. I never had the one from my own bike.

 

[Smurf]

There are two versions if I remember correctly. One that sits around the dome nut on your upper triple tree, and another that sits inside center hole in dome nut.
I can only provide measurements for the later one. It came with my GF's 650 K3. I never had the one from my own bike.

That would be great

 

[Missing Link]

That would be great

Has yours got a dome cap over the stem ? Or a clear hole..?

Regardless, and i am sure estevns will highlight it, but there is a "swage" on the portion that goes into the tank mount hole to stop it sliding through.

 

[Smurf]

Has yours got a dome cap over the stem ? Or a clear hole..?

Regardless, and i am sure estevns will highlight it, but there is a "swage" on the portion that goes into the tank mount hole to stop it sliding through.

Good morning missing link,
Mine has a clear hole

 

[estevns]

Sorry it took ages, and not the best picture, but can make a drawing with measurements tomorrow. But you probably get the idea. Made from a Ø5mm rod.

Edit: Photo removed, drawing added below.

 

[estevns]

Drawing with measurements, it might not be 100% exact but should be enough to make one yourself.

 

[Smurf]

Hi, I've only just seen this, I didn't get a notification. Great 👍🏻 Thanks 😊